HOW TO MEASURE

    1. MEASURE DEPTH

    Confirm that the window casing is deep enough to fit the blind. For proper installation, your window casing
    must be at least ¾" deep. For a flush mount (blind is fully recessed inside the frame), your window casing must
    be at least 2¾" deep.

    2. MEASURE WIDTH
  • Measure the inside width of the window casing at three places: top, middle and bottom.
  • Record the narrowest measurement, rounding down to the nearest inch. (For example, if your
    narrowest measurement is 35⅝", round down to 35".)
  • Use this measurement when selecting your blind width.
    3. MEASURE HEIGHT
  • Measure the inside height of the window casing at three places: left, middle and right.
  • Record the tallest measurement, rounding up to the nearest inch. (For example, if your tallest
    measurement is 62¼", round up to 63".)
  • Use this measurement when selecting your blind length.
    IMPORTANT NOTE

    To make sure your blinds fit as well as possible, choose a whole inch width that is at least ½" smaller than your window.
    The manufacturer will make NO deductions.